V4 51 Warranty and repair kit V4, 5 year, P60-P70 (Master/Evolution – EU)
Applicable for:
- AVA Master: P60 & P70 – both Master 1.0 & Master 2.0 (EU version)
- AVA Evolution, P60 & P70. (EU version)
This V4 Warranty & Repair Kit is designed to fully restore the pump module and key wear components in your pressure washer.
Kit includes:
- Pre-assembled pumphead, main valve, and pump body.
- Inlet pipe and outlet pipe for both Master and Evolution version
-
AVA First Aid Kit:
- Torx T25 200 mm
- O-rings for hose and swivel
- Water filter (inner part)
- Screws
- U-pin.
- Upgraded switchbox with electric cable (limited-time bonus) for enhanced machine performance.
This kit allows for a major repair in one go, reducing downtime and ensuring your pressure washer is restored to peak performance.
Who is this kit for?
This kit is designed for both professional workshops and private customers.
If you follow AVA’s official step-by-step guides, most users with basic tools and some patience can complete the replacement successfully.
We have made the parts as easy to replace as possible, and we provide detailed repair guides, safety information, and tool lists to help you along the way.
Note for Master: This service requires disassembly of the motor and pump, but the included step-by-step AVA guide makes the process straightforward for both professionals and skilled home users.
If at any point you are unsure, AVA’s service team and our network of workshops are ready to assist you – whether you need advice, troubleshooting, or a full service.
Typical cause of failure
- Long-term wear on pumphead seals and valves
- Mineral deposits or debris damaging internal pump surfaces
- Freezing damage to pump body or valve components
- Electrical switch wear due to frequent on/off cycles
Failure symptoms – Part correlation
- Loss of water pressure or pulsing during operation
- Leaks around the pumphead or inlet/outlet connections
- Machine fails to start or shuts off unexpectedly
- Unusual noise or vibration from the pump housing
Installation advice
- Ensure the machine is disconnected from power and water supply before starting
- Always priority safety first: Safety instructions – AVA of Norway
- Follow the appropriate 5-year service guide for your model:
- Master P60–P70
- Evolution P60-P70
- Clean all surrounding parts before installing the new pump assembly
- Double-check that all O-rings and seals are correctly positioned and lubricated before tightening screws
General note: Follow the guide above to the step where the pump assembly is accessed. Remove the old assembly and install the new pre-assembled unit. Ensure all parts are clean, complete, and correctly fitted before completing the repair. Continue following the guide to finish reassembly.
Tools needed for all AVA pressure washer maintenance.
Warranty and Self-Repair – The AVA Way
At AVA, we encourage repair – not throwaway culture. You’re free to open your machine, inspect it, and replace parts yourself without losing your warranty. We offer guides, spare parts, and support so you can keep your machine running for many years – whether it’s a small seal or a full pump module.
Many parts are designed to be replaceable – just like they should be.
Visible signs of use or repair are welcomed – they mean the product is being cared for.
Learn more here: AVA Warranty Terms & Conditions
Price includes VAT
V4 51 Warranty and repair kit V4, 5 year, P60-P70 (Master/Evolution – EU)
Applicable for:
- AVA Master: P60 & P70 – both Master 1.0 & Master 2.0 (EU version)
- AVA Evolution, P60 & P70. (EU version)
This V4 Warranty & Repair Kit is designed to fully restore the pump module and key wear components in your pressure washer.
Kit includes:
- Pre-assembled pumphead, main valve, and pump body.
- Inlet pipe and outlet pipe for both Master and Evolution version
-
AVA First Aid Kit:
- Torx T25 200 mm
- O-rings for hose and swivel
- Water filter (inner part)
- Screws
- U-pin.
- Upgraded switchbox with electric cable (limited-time bonus) for enhanced machine performance.
This kit allows for a major repair in one go, reducing downtime and ensuring your pressure washer is restored to peak performance.
Who is this kit for?
This kit is designed for both professional workshops and private customers.
If you follow AVA’s official step-by-step guides, most users with basic tools and some patience can complete the replacement successfully.
We have made the parts as easy to replace as possible, and we provide detailed repair guides, safety information, and tool lists to help you along the way.
Note for Master: This service requires disassembly of the motor and pump, but the included step-by-step AVA guide makes the process straightforward for both professionals and skilled home users.
If at any point you are unsure, AVA’s service team and our network of workshops are ready to assist you – whether you need advice, troubleshooting, or a full service.
Typical cause of failure
- Long-term wear on pumphead seals and valves
- Mineral deposits or debris damaging internal pump surfaces
- Freezing damage to pump body or valve components
- Electrical switch wear due to frequent on/off cycles
Failure symptoms – Part correlation
- Loss of water pressure or pulsing during operation
- Leaks around the pumphead or inlet/outlet connections
- Machine fails to start or shuts off unexpectedly
- Unusual noise or vibration from the pump housing
Installation advice
- Ensure the machine is disconnected from power and water supply before starting
- Always priority safety first: Safety instructions – AVA of Norway
- Follow the appropriate 5-year service guide for your model:
- Master P60–P70
- Evolution P60-P70
- Clean all surrounding parts before installing the new pump assembly
- Double-check that all O-rings and seals are correctly positioned and lubricated before tightening screws
General note: Follow the guide above to the step where the pump assembly is accessed. Remove the old assembly and install the new pre-assembled unit. Ensure all parts are clean, complete, and correctly fitted before completing the repair. Continue following the guide to finish reassembly.
Tools needed for all AVA pressure washer maintenance.
Warranty and Self-Repair – The AVA Way
At AVA, we encourage repair – not throwaway culture. You’re free to open your machine, inspect it, and replace parts yourself without losing your warranty. We offer guides, spare parts, and support so you can keep your machine running for many years – whether it’s a small seal or a full pump module.
Many parts are designed to be replaceable – just like they should be.
Visible signs of use or repair are welcomed – they mean the product is being cared for.
Learn more here: AVA Warranty Terms & Conditions
